Setting - Output function

Select “Output” in the tab bar on the app's main screen and then set each function of the output.

When the setting is complete, always walk-test to ensure the proper operation.

Output_Screen_iOS_Android_31333

OFF /

ON

Set this to “ON” when a detection signal from the microwave detection area is used for each output.

OFF /

ON

Set this to “ON” when a detection signal from the active infrared detection area is used for each output.

Set this to “ON” when a detection signal from the microwave detection (pre-notification) area is used for AUX output.

N.O. /

N.C.

Output contact is selectable from two options, “N.O.” or “N.C.”

0.5 sec. /

1.0 sec. /

1.5 sec. /

2.0 sec. /

2.5 sec. /

3.0 sec.

The output hold time after the sensor has changed from detection status to non-detection status is selectable from six options.

< 0.3 sec. /

0.5 sec. /

1.0 sec. /

1.5 sec. /

2.0 sec. /

2.5 sec. /

3.0 sec.

Response time for activation output is selectable from seven options. Use this function when a detection signal needs to be sent after the designated time.