Setting - Microwave function

Select “Area” in the tab bar on the app's main screen and then set each function of the microwave area.

When the setting is complete, always walk-test to ensure the proper operation.

Area_Screen_iOS_Android_31333
Sensitivity_Level_31333

Set the sensitivity level for the microwave detection area. By increasing the level, the detection area becomes larger. Set the sensitivity low when the sensor operation is unstable.

Sensitivity_Level_31333

Set the sensitivity level for pre-notification (*1). By increasing the level, the detection area becomes larger. Set the sensitivity low when the sensor operation is unstable.

(*1) What is “pre-notification”?

In addition to the standard microwave area, the sensor can assign a pre-notification microwave area outward. This can be used for the purpose of collision prevention by connecting the sensor to a flashing light / alert sound. Set the “Sensitivity (pre-notification)” higher than “Sensitivity” if you are using the pre-notification function.

Pre-Notification_Area

Disable /

Lv1 /

Lv2 /

Lv3

Use this function only when a malfunction occurs due to rain, snow, or other factors. The higher the level, the stronger it becomes against malfunctions. However, the detection area becomes smaller.

Bi /

Uni /

Uni with Autocaution

The direction mode in the microwave detection area can be selected from the following three patterns.

[Bi]

The sensor detects objects regardless of direction.

[Uni]

The sensor detects only approaching objects.

[Uni with Autocaution]

Direction mode switches to the “Bi” setting only during detection.

Direction_all

Disable /

Low /

Middle /

High

Crossing_cancel

Vehicles passing in front of the sensor can be ignored. Increasing the level makes it easier to ignore vehicles.