Using masking seals 2 to 6, you can set a special detection area for the horizontal position A or G.
-
01Set to the desired area setting direction (horizontal position A or G).
-
-
02When setting other than masking seal 1, cut off the knockout portion at the lower lens holder.
-
-
03Select a masking seal from 2 to 6 according to the desired shape of area setting, and put it on the lens.
-
Set to A or G
Five patterns of special detection areas can be configured by applying a masking seal.
Detection area can be set only at the both sides.
5 × 10 m area can be set.
1.5 × 10 m area can be set.
10 × 5 m area can be set.
10 × 1.5 m area can be set.
