 | SensorNavi |
Battery holder - for CR123A Lithium batteries -
BH-01
Parts identifications
Applicable models
How to use the holder
 | Insert four (4) batteries (not included). |
|  |
 | Set a dummy battery (for battery sharing installation only). |
 |
 | If the battery is NOT shared between a wireless transmitter and the WXS/WXI, skip step 02 and go to step 03. |
|
| If the transmitter uses CR2 lithium battery (3.0 V DC), change the combination of the dummy battery. |
|
 | Push and disassemble. |
|  |
 | Turn the plus parts so that the square and the triangle marks are faced to the each other. |
|  |
 | Insert it into the battery space of the transmitter, in the same way as for CR123A, but without the jacket parts. |
|  |
 | Set connectors. |
 | Mount a transmitter and the BH-01 on the back of the WXS/WXI. |
|  |
 | Connect each device. |
 | Battery sharing with a transmitter. |
|  |
space
space |
 | Non battery sharing with a transmitter. |
|  |
 | Align the wiring neatly so as not to bite the wires when assembling. |
|  |
Dimensions
Web manual reference
Link to the Web manuals of the applicable models.
8004240 2019.02.12
Copyright © 2019 OPTEX CO., LTD.
